Prototype board for 40 pin Atmel ATMega microcontrollers with power supply circuit, 8MHz crystal oscillator circuit, RS232 port, reset IC, status LED, and 10 pin STK ICSP port.

Board does not come with AVR Microcontroller installed. 

Features:

• STK200 compatible ICSP 5x2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2
• JTAG 5x2 pin connectr for in-circuit programming and debugging with AVR-JTAG-USB and AVR-JTAG-L
• RS232 Tx, Rx interface with MAX232 IC on socket
• 8 MHz crystal on socket (user can replace with any value)
• reset IC ZM33064
• reset button
• general purpose push button
• status LED connected to PB0 via removable jumper
• DIL40 microcontroller socket
• Power plug-in jack
• selectable +3.3V / +5V power supply voltage regulator
• extension pin headers for each uC pin
• four mounting holes 3.3 mm (0.13")
• GND bus
• Vcc bus
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• dimensions 100x80 mm (3.9x3.15")

Dimensions: 100x80 mm (3.9x3.15")

Schematic design AVR-P40

Datasheet AVR-P40

AVR ICSP connector

Product Page on AVR-P40