|
Support USB for data transmission to PC
Waveform Record and Playback(HDS2062M-N,HDS3102M-N)
| Oscilloscope Specification |
| Model Name |
HDS1022M-N |
HDS2062M-N |
HDS3102M-N |
| Bandwidth |
20MHz |
60MHz |
100MHz |
| Sample Rate ( Real time ) |
100MS/s |
250MS/s |
500MS/s |
| Horizontal Scale(S/div) |
5ns/div~100s/div,step by 1~2.5~5 |
5ns/div~100s/div,step by 1~2~5 |
| Rise time(at input, typical) |
≤17.5ns |
≤5.8ns |
≤3.5ns |
| Display |
3.7 inch color display with TFT panel(640×480 pixels, 65535 colors) |
| Channels |
Dual |
| Input impedance |
1MΩ±2%,in parallel with 20pF±5pF |
1MΩ±2%,in parallel with 15pF±5pF |
| Record length |
Max. 6000 points on each channel |
| Interpolation |
(sin x)/x |
| Probe attenuation factor |
1X,10X,100X,1000X |
| Input coupling |
DC, AC, GND
|
| DC accuracy(Average) |
Average>16:±(3% reading +0.05div) for △V |
Average>16:±(5% reading+0.05div) for △V |
| Vertical Sensitivity |
5mV/div~5V/div (at input) |
| Vertical resolution (A/D) |
8 bit(2 channels simultaneously ) |
| Max. Input Voltage |
400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1) |
| Trigger Type |
Edge, Video, Alternate |
| Trigger Mode |
Auto, Normal, Single |
| Trigger level |
±6 divisions from screen center |
| Acquisition modes |
Sample, Peak Detect and Average |
| DC gain accuracy |
±3% |
±3% |
| Automatic Measurement |
Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot ,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B 、 Delay A→B  |
| Waveform math |
+, -, ×, ÷, Invert, FFT |
| Waveform storage |
4 waveforms |
Lissajou’s figure |
Bandwidth |
20MHz |
60MHz |
100MHz |
| Phase difference |
±3 degrees |
| Communication interface |
USB |
| Power supply |
100V-240V AC, 50/60Hz |
| Li-ion battery |
7.4V, 6 hours operation |
| |
| Multimeter specifications |
| Full scale reading |
3 3/4 digits (Max.4000-count) |
Diode |
0V-1.5V |
| Input Impedance |
10 MΩ |
On/Off measurement |
<50(±30) beeping |
| Capacitance |
51.2nF-100uF:±(3%±3 digit) |
| Voltage |
VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 400V, VAC:4V,40V, 400V:±(1±3digit) Frequency:40Hz-400Hz, Max:input:AC 400V(virtual value) |
| Current |
DCA:40mA, 400mA:±(1.5%±1 digit) 20A:±(3%±3digit) DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 20A:±(3%±3digit) |
| Impedance |
400Ω:±(1%±3digit), 40Ω |
| Interface |
USB Data Cable (Transfer waveform data to a PC) |
| Power |
Supply:100V~240V AC,50/60Hz DC input: 8.5VDC, 1500mA Battery: 6 hours |
| Dimension |
180mm x 113mm x 40mm |
| Weight |
645g |
|
|