Loading... Please wait...

Our Newsletter

S-1360 Elenco 60MHz Delayed Sweep Analog Oscilloscope

20.00 LBS
Bookmark and Share

Product Description

The S-1360 Elenco 60MHz 2 channel Analog Oscilloscope is dual trace and delayed sweep and UL and CSA approved.

  • Delayed Sweep & Dual Trace
  • 1mV/DIV Sensitivity.
  • Sweep to 10ns/DIV.
  • Component Tester
  • Z Axis Input.
  • Single Sweep.
  • Beam Finder.
  • Front face dust cover included.

S-1360 Elenco PDF Manual

Vertical Amplifiers (CH 1 and CH 2) Horixontal Amplifier (continued)
Sensitivity:  5mV/div - 5V/div (x1 mode).
                  1mV/div - 1V/div (x5 mode).
Attenuator: 1-2-5 sequence, 10 step attenuator plus   vernier control.
Rise Time: 5.8ns (S-1360), 3.5ns (S-1390).
Over Shoot: Less than 5%.
Input Impedance: 1M Ω ±2%, 25pF ±10%.
Max Input Voltage: 400V (DC + AC peak).
Operating Modes: CH1, CH2, DUAL(ALT or CHOP) and ADD.
Chop Frequency: Approximately 500kHz.
Algebraic Addition: CH 1 + CH 2, CH 1 - CH 2.
Inverter: CH 2 only.
Polarity Reversal: CH 2 only
Bandwidth: DC - 1MHz(-3dB).

X-Y Phase Difference: Approximately 3 ° at 50kHz.


Horizontal Amplifier Sweep System
X-Y Mode: Switch selectable using X-Y switch
          CH 1: X axis.
          CH 2: Y axis.
Accuracy: Y axis ±3%, X axis±6%
Sweep Display Mode: Main, Mix, Delay
Hold Off Time: 5:1 continuously variable (0.1 µs/div).
Main Sweep

Sweep Speed:
S-1360: 0.1 µs/div - 2s/div in 1-2-5 sequence, 23 steps
S-1390: 20ns/div - 0.5s/div in 1-2-5 sequence, 23 steps
Accuracy: ±3%
Variable Time Control: 5:1, uncalibrated, continuously variable between steps.
Sweep Magnification:
10X, ±10%, extend sweep speed up to 10ns/div (S-1360).
10X, ±10%, extend sweep speed up to 2ns/div (S-1390).


Delayed Sweep Component Tester (S-1360 only)
Sweep Speed:
S-1360: 0.1 µs/div - 2s/div in 1-2-5 sequence, 23 steps.
S-1390: 20ns/div - 0.5s/div in 1-2-5 sequence, 23 steps.
Acccuracy: ±3%
Delay Time Position: Varaiable control to locate desirable waveform for extending.
Test Voltage: Max. 6Vms (open circuit).
Test Current: Max. 11mA (shorted).
Test Frequency: Line Frequency.
Components: Capacitor, Inductor, Diode, Transistor, Zener etc.
Trigger CH 2 Output
Trigger Coupling: AUTO, NORM, TV-V, TV-H (S-1360).
AC, TV-V, TV-H, LINE (S-1390)
Trigger Source: CH 1, CH2, ALT (V MODE), LINE, EXT.
Slope: ±
Output Level: 100mV/DIV (no load). 50mv/div (50 Ω load).
Bandwidth: 20Hz - 20MHz (-3dB).
Trigger Sensitivity (S-1360/S-1390) Other Specifications
Coupling Bandwidth Internal External CRT:  Type: Rectangular with internal graticule.
        Display Area: 8 x 10 div (1div = 1 cm).
        Accelerating Voltage: 12kV (S-1360), 14kV (S-1390).
        Phosphor: P31
Z Modulation: Positive TTL signal, low level blank intensity at any intensity, high level unblank any intensity.
Trace Rotation: Adjustable front panel.
Calibrator: Square wave 1kHz, 2.0Vpp ±3% (S-1360)
                Square wave 1kHz, 0.5Vpp (S-1390)
Power requirements: 115, 230VAC±10%, 50/60Hz.
Power Consumption: Approximately 55 watts
Dimensions: 5 1/4" (H) x 12 3/4" (W) x 15 5/8" (D).
New Weight: S-1360: 17.2lbs (7.8kgs) S-1390: 18.7lbs (8.5kgs).
Accessories Supplied: Two x1, x10 probes, schematic diagram & parts list, AC power cord, spare fuse and dust cover.
TV-V DC- 1kHz 1.0 div 0.1Vpp
TV-H 1kHz - 100kHz 1.0 div 0.1Vpp
AUTO 100Hz -60/100MHz 1.5/2.0 div 0.1/0.2Vpp
NORM 100Hz -60/100MHz 1.5/2.0 div 0.1/0.2Vpp

Find Similar Products by Category

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States US Dollars
Canada CAD Dollars

Payment Methods

Electronics Top Sellers


Add to Wish List

Click the button below to add the S-1360 Elenco 60MHz Delayed Sweep Analog Oscilloscope to your wish list.

You Recently Viewed...