FEATURES:

 - Frequency range: 150kHz ~ 1GHz

 - Fully digital phase locked loop technique design

 - High. frequency stability: ±10ppm

 - High resolution of span to measure the more detailed signal: zero, 2kHz~100MHz/div - RBW: 3k, 30k, 220k, 4MHz

 - High input protection level: +30dBm, ±25VDC

 - Reference level range: -30dBm~+20dBm

 - Good noise floor performance: -95dBm @30kHz, -100dBm typical over -150dBm/Hz typical @220kHz & 4MHz RBW

 - Spurious noise: <-60dB

 - Intermodulation (3rd): <70dBc

 - Two markers for absolute & relative measurement

 - Functiona: Max. hold, average (2~32 traces), freeze, peak search, marker to center functions

 - 9 Memories of save/recall

 - RS-232C interface & software to get trace from GSP-810 to PC

 - Options: Power meter, tracking generator, romote control software

 

SPECIFICATIONS:

- Frequency:

•Range: 150kHz ~ 1GHz

•Resolution: 1kHz C.F. entry, 40Hz sweep resolution at 2kHz/div

•Display: 6½ digit setting

•Control: Digital phase locked

•Stability: ±2ppm/year aging, ±10ppm, 0~50°C

•Spans: zero, 2kHz~100MHz/div in a 1-2-5 sequence

 

- Bandwidth:

•Resolution Bandwidths: 3kHz, 30kHz, 220kHz, 4MHz

•Resolution BW Accuracy: 15%

•Video Bandwidth: 1.6kHz/90kHz couple with RBW

 

- Amplitude:

•Reference Level Range: -30dBm~+20dBm

•Reference Level Accuracy: ±1dB at 80 MHz

•Input Level Range: -100dBm~+20dBm

•Noise Floor: -95dBm@30kHz RBW, -100dBm typical/=75dBm: 150kHz~10MHz

•Amplitude Display Range: 75dB

•Amplitude Accuracy: ±1.5dB typical @ 0dBm, 80MHz

•Amplitude Level Linearity: ±1.5dB over 70dB

•Ref. Level Freq. Flatness: ±1.5dB over 100MHz, ±2.5dB typical over entire band/±3dB: 150kHz~10MHz

•Harmonic Spur Response: <-40dBc, RF input < selected reference

•Non-Harmonic Spur Response: <-60dBc typical down from reference level, average, 5MHz/div

•Intermodulation (3rd): <-70dBc, @ -40dBm input, 2 tones, 2MHz apart/<-45dBc: 150kHz~10MHz

•Phase Noise: -77dBc/Hz at 1GHz, 30kHz offset

 

- Input:

•Input Overload Protection: +30dBm continuous, ±25VDC

•Impedance: 50W nominal

•Return Loss: <16dB (VSWR < 1.35)

•Input Attenuation: 50dB to 0dB in 10dB steps coupled to reference level

•Connector: Type N female

 

- Marquer:

•Number of Markers: 2

•Marker Resolution: 0.1dB, 1kHz

•Marker Mode: Absolute, relative, PK ->marker, marker->center

•Marker Accuracy: 0.1dB ±amplitude accuracy

 

- Functions:

•Memory: 9 memories of save/recall

•Trace: Max. hold, average (2~32 traces), freeze (Hold)

•Setup: Access parameters

 

- Remote Display Software & RS-232C: Connecting to PC & getting the trace from GSP-810, software will be downloaded from GW Web-site

 

- FM/AM Demodulator:

•WB FM: 120kHz deviation

•MB FM: 75kHz deviation

•NB FM: 30kHz deviation

•AM Outputs: Internal speaker, 3.5mm stereo jack, wired for mono operation

 

- Power Source: AC 100V/120V/220V/230V ±10%, 50/60Hz

 

- Accessory: Operation manual x 1

 

- Dimensions & Weight: 310 x 150 x 455mm (W x H x D) Approx. 8.5kg

 

- Options 01—Tracking Generator:

•Frequency Range: 150kHz~1GHz

•Amplitude Range: 0~50dBm

•Amplitude Resolution: 1dB

•Amplitude Accuracy: ±1dB @ 0dBm, 80MHz

•Amplitude Flatness: ±1dB @ 10MHz/DIV, ±1.5dB@0dB, entire band

•Harmonics: <-30dBc (<-25dBc, 150kHz~10MHz)

•Reverse Power: <+30dBm

•Impedance: 50W nominal

•Return Loss: <10dB (VSWR < 2)

•Connector: Type N female

 

- Options 02—Power Meter:

•Frequency Range: 10MHz~2GHz, usable to 2.7GHz

•Power Level Range: -20dBm~+23dBm, usable to +30dBm

•Power Level Overload: +40dBm <10% duty cycle,