|
The pager gear motor is geared 81:1 spins at 370 RPM and draws 24.6mA(184mA stall) at 5V giving 3.6in*oz.
These little gear motors measure 1" wide, 0.564" thick, 1.135" long and weigh in at 5 grams. The square output shaft measures 0.14" per side.
They're a bit funky in that they're not continuous rotation by default. They have a self-centering spring, so applying DC power will result in a 60 degree swing in one direction. Reversing power swings the output arm 60 degrees the other way. Remove the self-centering spring and clip the stops, and away you go!
You want to install the motors a distance away from the controller? These come with 12" stranded wire leads!
|
Description: |
Centering Pager Gearmotor |
|
Gear Ratio: |
81.00:1 |
|
Unloaded RPM (3V): |
233 |
|
Unloaded RPM (6V): |
454 |
|
Unloaded Current (3V): |
13 mA |
|
Unloaded Current (6V): |
20 mA |
|
Stall Current (3V): |
118 mA |
|
Stall Current (6V): |
220 mA |
|
Stall Torque (3V): |
2.20 in*oz |
|
Stall Torque (6V): |
3.17 in*oz |
|
Length (mm): |
14.30 mm |
|
Width (mm): |
25.40 mm |
|
Height (mm): |
28.80 mm |
|
