|
Features:
- 100MHz, dual channel, delayed sweep
- Built-In 6 digits universal counter (GOS-6103C)
- 10 Sets memory for front panel setting save & recall (GOS-6103/GOS-6103C)
- Time base auto-range (GOS-6103/GOS-6103C)
- Cursor Readout with 7 measurements
- Panel setup lock of digital-control functions
- Buzzer alarm
- LED indicators
- TV synchronization
- Trigger signal output
- Z axis modulation input
- SMD technology, high stability & reliability
Specifications:
- CRT
•Type: 6 inch rectangular type with internal graticule; 0%, 10%, 90% & 100% markers. 8 x 10 div (1div=1cm)
•Phosphor: P31
•Accelerating Potential: 16kV approx. (GOS-6103/GOS-6103C), 12kV approx. (GOS-6112)
•Illumination: Continuously adjustable (GOS-6103/GOS-6103C)
•Z-Axis Input: Coupling: DC, sensitivity: 5V or more, max input volt: 30V (DC+AC peak) at 1kHz or less, bandwidth: DC~5MHz
- Vertical System
•Sensitivity: 2mV~5V/div, 11 step in 1-2-5 sequence
•Sensitivity Accuracy: £3% (5 div at the center of display)
•Vernier Vertical Sensitivity: Continuously variable to 1/2.5 or less of panel-indicate value
•Bandwidth (-3dB): DC~100MHz (2mV/div:DC~20MHz)
•Rise Time: 3.5ns (2mV/div:17.5ns)
•Signal Delay: Leading edge can be monitored
•Max. Input Volt: 400V (DC+AC peak) at 1kHz or less
•Input Coupling: AC, DC, GND
•Input Impedance: 1MW ±2%//approx. 25pF
•Vertical Mode: CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV
•Bandwidth Limited: 20MHz
•Common-Mode Rejection Ratio: 50:1 or better at 50kHz
•Dynamic Range: 8 div at 60MHz; 5 div at 100MHz (GOS-6112). 8 div at 100MHz (GOS-6103/GOS-6103C)
- Horizontal System
•Modes: Main (A), ALT, DELAY (B)
•A(main) Sweep Time: 50ns~0.5s/div, continuously variable (UNCAL)
•B(delay) Sweep Time: 50ns~50ms/div
•Accuracy: ±3% (±5% at x 10 MAG)
•Sweep Magnification: x 10 (max sweep time 5ns/div)
•Hold Off Time: Variable
•Delay Time: 1µs~5s
•Delay Jitter: Better than 1:20000
•Alternate Separation: Variable
- Trigger
•Mode: AUTO, NORM, TV
•Source: CH1, CH2, Line, Ext
•Coupling: AC, DC, HFR, LFR
•Slope: "+" or "-" polarity or TV sync polarity
•TV Sinc: TV-V, TV-H
•Max. ECternal Input Volt: 400V (DC+AC peak) at 1kHz
•External Input Impedance: 1MW±5%// approx. 25pF
- X-Y Operation
•Mode: X-axis: selectable CH1, CH2, EXT; Y-axis: selectable CH1, CH2, CH1 & CH2
•Sensitivity Accuracy: 2mV~5V/div±3%; EXT: 0.1V/div±5%
•X-Axis Bandwidth: DC~500kHz (-3dB)
•Phase Error: 3° or less from DC~50kHz
-Output Signal
•Trigger Signal Output: Volt: approx. 25mV/div into 50W; Frequency response: DC~10MHz
•Calibrator Output: 1kHz Squarewave, 2Vpp ±2%
- Cursor Readout Function
•Cursor Measurement Function: DV, DV%, DVdB, DT, 1/DT, D0
•Cursor Resolution: 1/100 div
•Effective Cursor Range: Vertical: ±3div; Horisontal: ±4div
•Panel Setting Display: Vertical: V/div (CH, CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND. Horizontal: s/DIV (MTB, DTB), UNCAL, x 10MAG, delay time, HO. Trigger: source, coupling, slope, level, TV-V, TV-H. Other: X-Y, lock, save/recall MEM 0-9 (GOS-6103/GOS-6103C)
- Auto Measurement Function (GOS-6103C)
•Parameter Function: FREQ, PERIOD, ±WIDTH, ±DUTY (+ or - polarity selected by trigger slope)
•Display Digits: Max. 6 digits, decimal
•Frequency Range: 50Hz~100MHz
•Accuracy: 1kHz~100MHz:±0.01%; 50Hz~1kHz:±0.05%
•Measuring Sensitivity: >2div (Measuring source selected from CH1 & CH2 as synchronous signal sources)
- Special Function
•TIME/DIV Auto Range: Provided (GOS-6103/GOS-6103C)
•Panel Setting Save & Recall: 10 sets (GOS-6103/GOS-6103C)
•Panel Setups Lock: Provided
- Power Source: AC 100V/120V/230V ±10%, 50Hz/60Hz
- Accessories: Power cord x 1, Instruction manual x 1, LF-210E Probes (10:1/1:1) x 2
|
Order # |
Description |
Price |
|
GOS-6112 |
100MHz |
$1149.99 |
|
GOS-6103 |
100MHz |
$1249.99 |
|
GOS-6103C |
100MHz |
$1299.99 |
See Order# Drop Down Menu below to order above items. |
