|
|
|
SPECIFICATIONS |
|
CRT |
Type
|
GRS-6052A: 6-inch CRT 150CTB31, 10kV
GRS-6032A: 6-inch CRT D14-363GY, 2kV
|
|
INTEN and FOCUS |
Front panel control |
|
Illumination |
Front panel control |
|
Z-axis Output |
Sensitivity: at least 5V (TTL) |
|
Polarity: positive going input decrease intensity |
|
Max.input voltage: 30V (DC+AC peak) |
|
GRS-6052A: Input impedance: approx. 47kΩ
GRS-6032A: Input impedance: approx. 33kΩ |
|
|
|
VERTICAL
SYSTEM |
Sensitivity and Accuracy |
1mV ~ 2mV/DIV±5%, 5mV ~ 20V/DIV±3%, 14 calibrated steps in 1-2-5 sequence |
|
Variable Continuously |
2.5:1 ~ min. 50V/DIV |
|
Bandwidth (-3dB) and Rise Time |
|
|
|
Bandwidth(-3dB) |
Rise Time |
|
GRS-6052A |
5mV ~ 20V/DIV |
DC ~ 50MHz |
Approx. 7nS |
|
1mV ~ 2mV/DIV |
DC ~ 7MHz |
Approx. 50nS |
|
GRS-6032A |
5mV ~ 20V/DIV |
DC ~ 30MHz |
Approx. 11.7nS |
|
1mV ~ 2mV/DIV |
DC ~ 7MHz |
Approx. 50nS |
|
|
Vertical Mode |
CH1, CH2, DUAL(ALT or CHOP) |
|
Chopper Frequency |
Approx. 250kHz |
|
Sum or Difference |
CH1+CH2, CH1-CH2 |
|
Invert |
CH2 |
|
Input Impedance |
Approx. 1MΩ±2% // approx. 25pF |
|
Input Coupling |
AC, DC, GND |
|
Maximum Input Voltage |
400V (DC + AC peak) |
|
|
|
HORIZONTAL SYSTEM |
Sweep Time |
0.2µS/DIV ~ 0.5S/DIV, 20 steps selectable in 1-2-5 sequence |
|
Variable Continuously |
2.5:1 UP TO 1.25s/DIV (uncal.) |
|
Accuracy |
±3%, ±5% at x5, x10 MAG. ±8% at x20 MAG |
|
Sweep Magnification |
x5, x10, x20 |
|
Max. Sweep Time |
GRS-6052A: 20nS/DIV (10nS/DIV are uncalibrated) |
|
GRS-6032A: 50nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated) |
|
ALT-MAG Function |
YES |
|
HOLD-OFF Time |
Variable |
|
|
|
TRIGGER SYSTEM |
Trigger Modes |
AUTO, NORM, TV |
|
Trigger Source |
VERT, CH1, CH2, LINE, EXT |
|
Trigger Coupling |
AC, HFR, LFR, TV-V(-), TV-H(-) |
|
Trigger Slope |
"+" or "-" polarity |
|
ALT Trigger |
YES |
|
Trigger Sensitivity |
|
GRS-6052A |
CH1,2 |
VERT -MODE |
EXT |
|
20Hz ~ 5MHz |
0.5 DIV |
2.0 DIV |
200mV |
|
5MHz ~ 40MHz |
1.5 DIV |
3.0 DIV |
800mV |
|
40MHz ~ 50MHz |
2.0 DIV |
3.5 DIV |
1V |
|
|
GRS-6032A |
CH1,2 |
VERT -MODE |
EXT |
|
20Hz ~ 5MHz |
0.5 DIV |
2.0 DIV |
200mV |
|
5MHz ~ 40MHz |
1.5 DIV |
3.0 DIV |
800mV |
|
|
TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV(EXT) |
|
External Trigger Input |
Input Impedance: Approx. 1MΩ // 25pF (AC coupling) |
|
Max. input voltage: 400V (DC+AC peak) at 1kHz |
|
|
|
X-Y OPERATION |
Input |
X-axis:CH1 ; Y-axis:CH2 |
|
Sensitivity |
1mV/DIV ~ 20V/DIV |
|
Bandwidth |
X-axis: DC ~ 500kHz (-3dB) |
|
Phase Difference |
3º or less from DC to 50kHz |
|
|
|
DIGITAL STORAGE
|
Acquisition Memory
|
8 bit ADC x 2 |
|
Maximum Sampling rate |
500MS/s for Equivalent time sampling
100MS/s for normal sampling |
|
Storage Bandwidth |
Single shot:DC~5MHz(-3dB)
Repetivivevent:
GRS-6052A: DC~50MHz ±5DIV
GRS-6032A: DC~30MHz ±5DIV |
|
Dynamic Range |
±5DIV |
|
Memory Length |
Acquisition Memory: 2kW/CH*2, 1kW/CH(equivalent)
Save REF Memory: 1kW/CH*10 with back-up memory
Display memory: 1kW/CH*4 waveform (max.) |
|
Sweep Time |
Equivalent: 0.2µs/DIV ; 0.5µs/DIV
Normal: 1µs/DIV~0.1s/DIV
ROLL:0.2s/DIV~100s/DIV |
|
Sweep Magnification
|
x5, x10, x20 |
|
Max. Sweep Time
|
10ns/DIV |
|
MAG Interpolation
|
DOT, Linear |
|
ALT-MAG Function
|
YES |
|
Acquire Mode |
Sample, Peak Detect(>25ns), Envelop, Per-sist, Average(2~256) |
|
Operation Mode
|
Auto, Norm, Single, Single-Roll, Roll, X-Y, Average(2~256), Run/Stop |
|
Smoothing Function
|
Dot joint ON/OFF selectable |
|
Pre-Trigger
|
0~10DIV in 0.02DIV steps |
|
X-Y Operation
|
X-axis: CH1, Y-axis: CH2
Storage Bandwidth:
GOS-6052A: DC~50MHz(-3dB)
GOS-6032A: DC~30MHz(-3dB) |
|
Display Resolution
|
H:100points/DIV ; V:25 points/DIV
X-Y: 25*25 points/DIV |
|
Waveform SAVE/RECALL
|
10 sets (REF0~REF9) |
|
|
|
CURSOR READOUT
|
Cursor Measurement
|
ΔV, ΔT, 1/ΔT |
|
Readout Intensity |
Adjustable |
|
|
|
OUTPUT SIGNAL |
|
CH1 Signal Output |
Voltage: approx. 20mV/DIV (with 50Ω terminated);
Bandwidth: 50Hz~5MHz |
|
Calibrator Output |
Voltage: 0.5V ±3%
Frequency: approx. 1kHz, Square wave |
|
|
|
INTERFACE
|
RS-232C Interface |
|
|
|
POWER SOURCE |
AC 100V/120V/ 230V
+ 10%, 50/60Hz |
|
|
|
ACCESSORIES |
Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2 |
|
|
|
DIMENSIONS & WEIGHT |
275(W) x 130(H) x 370(D) mm, Approx. 7.2kg |
