This is the most complete SX-Key programming tool kit that we offer. With the Professional Development Board and the SX-Key, your project will know no limits! The kit is well-equipped with high quality supporting material that consists of the SX-Key Manual v2.0 and an additional SX book. The SX Tech Tool Kit PRO is the best starting point to get you developing SX projects with Parallax's SX-Key programming tool. Upon receiving the kit, you will be able to program SX chips within the hour.
The SX-Key is Parallax's primary development tool for the SX line of microcontrollers, supporting every chip that is commercially available. By using the SX-Key software, the SX-Key programming tool can program SX chips in-system and perform in-circuit source-level debugging. Also at the user's fingertips is an on-board programmable clock. The frequency output of this clock is adjusted from the software with a slider bar between 400 kHz and 100 MHz. The software operates on Win98/NT/2K/XP platforms.
The Parallax Professional Development Board (PDB) is high-quality, fully-integrated development platform for BASIC Stamp, Javelin Stamp, and Parallax SX28AC/DP microcontrollers. A wide variety of typical I/O (LEDs, LCD interface, buttons, etc.) devices and circuitry are built into the PDB, providing the developer with an ideal platform for rapid microcontroller project development. Three sets of sockets are provided that allow the PDB to accommodate the BS1-IC module, the 24- or 40-pin BASIC Stamp modules, the 24-pin Javelin Stamp module, as well as the SX28AC/DP Microcontroller with an SX-Key. The SX28 socket is mechanically separated from the other modules and allows the SX28AC/DP to run with all BASIC Stamp and Javelin Stamp modules except the BS2p40. Contents of the SX Tech Tool Kit PRO include:
- Programming the SX Microcontroller Book by Gunther Daubach
- SX-Key Rev. F
- Professional Development Board
- (2) SX 28AC/DP 50 MIPS chips
- (1) Murata 50 MHz resonator
- (1) Murata 4 MHz resonator
- SX-Key Manual v2.0
- 4-pin header
- Serial cable
Please note: A power supply is not included.
Downloads:
SX-Key Manual v.2 (.pdf)
